3-14
MS-6421 Media Center
Connect the power cable of CPU cooler
first.
5. Installing CPU Cooler
Match the direction of CPU cooler and
mainboard retention module.
Install the CPU cooler onto the
mainboard retention frame by press-
ing the black holder down firmly with a
screwdriver and then close the silver
hook with your fingers pressing tightly.
＊
In order to protect your fingers from
hurting by the silver hook, putting
on the rubber gloves is necessary
and recommended.
Important
Please make sure the CPU Cooler is properly and completely fixed to the
mainboard retention module.
Important
Black holder here
Silver hook here
To Next Page
Loading...
Need help?
General
