MTS Sensors Temposonics E-Series - Position Magnets

Temposonics
®
E-Series CANopen
Operation Manual
18
Position magnets
M5
20
(0.79)
43
(1.69)
14
(0.55)
40 (1.58)
18°
25.3
(1)
M5
40 (1.58)
18°
57 (2.24)
14
(0.55)
25.3 (1)
49 (1.93)
Ø 32.8
(Ø 1.29)
Ø 23.8
(Ø 0.94)
Ø 13.5
(Ø 0.53)
Ø 4.3
(Ø 0.17)
60°
140°
3
(0.12)
7.9
(0.31)
19,5 (0.77)
1,5
(0.06)
33 (1.3)
14
(0.55)
20,5
(0.81)
14,9 (0.59)
8 ± 2 (0.31 ± 0.08)
Space sensor element
Ø 4.3
(Ø 0.17)
Magnet slider S
Part no. 252182
Magnet slider V
Part no. 252184
U-magnet OD33
Part no. 251416-2
Block magnet
Part no. 403448
For: EP and EL
Material: GFK, magnet hard ferrite
Weight: Ca. 35 g
Operating temperature: −40…+75 °C
(−40…+167 °F)
For: EP and EL
Material: GFK, magnet hard ferrite
Weight: Ca. 35 g
Operating temperature: −40…+75 °C
(−40…+167 °F)
For: EP and EH
Material: PA ferrite
Weight: Ca. 11 g
Surface pressure: max. 40 N/mm
2
Fastening torque for M4 screws:
Max. 1 Nm
Operating temperature: −40…+105 °C
(−40…+221 °F)
For: EP, EL and EH
Material: hard ferrite
Weight: Ca. 20 g
Operating temperature: −40…+75 °C
(−40…+167 °F)
Fastening torque for M4 screws:
Max. 1 Nm
Position magnets
Ø 32.8
(Ø 1.29)
Ø 23.8
(Ø 0.94)
Ø 13.5
(Ø 0.53)
Ø 4.3
(Ø
0.17)
7.9
(0.31)
Ø 25.4
( Ø 1)
Ø 13.5
(
Ø 0.53)
7.9
(0.31)
Ring magnet OD33
Part no. 201542-2
Ring magnet OD25,4
Part no. 400533
For: EH
Material: PA ferrite GF20
Weight: Ca. 14 g
Surface pressure: max. 40 N/mm
2
Fastening torque for M4 screws:
Max. 1 Nm
Operating temperature: −40…+105 °C
(−40…+221 °F)
For: EH
Material: PA ferrite
Weight: Ca. 10 g
Surface pressure: Max. 40 N/mm
2
Operating temperature: −40…+105 °C
(−40…+221 °F)
Additional options available in our Accessories Guide
551444)
Controlling design dimensions are in millimeters and measurements in ( ) are in inches
4.7 Frequently ordered accessories – Additional options available in our Accessories Guide
551444