To Next Page

To Previous Page

Temposonics

E-Series CANopen

Operation Manual

1.2 Used symbols and warnings

Warnings are intended for your personal safety and for avoidance

of damage to the described product or connected devices. In this

documentation, safety information and warnings to avoid danger

that might affect the life and health of operating or service personnel

or cause material damage are highlighted by the preceding pictogram,

which is deﬁned below.

1. Introduction

1.1 Purpose and use of this manual

The content of this technical documentation and of its various annexes

is intended to provide information on mounting, installation and

commissioning by qualiﬁed automation personnel

or instructed

service technicians who are familiar with the project planning and

dealing with Temposonics

sensors.

Before starting the operation of Temposonics

sensors read this

documentation thoroughly and follow the safety information.

Keep the manual for future reference!

Symbol Meaning

NOTICE

This symbol is used to point to situations

that may lead to material damage, but not

to personal injury.

1/ The term qualiﬁed technical personnel characterizes persons who:

• are familiar with the safety concepts of automation technology applicable to the

particular project,

• are competent in the ﬁeld of EMC,

• have received adequate training for commissioning and service operations

• are familiar with the operation of the device and know the information required for

correct operation provided in the product documentation.

MTS Sensors Temposonics E-Series User Manual

Other manuals for MTS Sensors Temposonics E-Series