22
Servo programming:
a. Servo settings
- Neutral position adjustment
- End position adjustment (EPA)
- Servo reverse
b. Servo assignment
Assign the functions to the channels on the receiver
c. Servo monitor
7. Clock symbol: Timer menu
See section 8. - Time display
8. Speedometer symbol: Telemetry
Setting the telemetry data
· Sensor address 0..3 or 4..7
Here you can change the sensor names in the menus and
select which data you want to have displayed and which
data you want to have announced.
· Language/vario
Here you can change the vario address, vario volume and
audio volume for the transmitter and dene the announce-
ment intervals
· Conrm warning LED
The warning LED for the voltage and residual capacity (tank
display) is switched off after the alarm has been deactivated.
9. Person symbol: Trainer mode and/or simulation mode
With the COCKPIT SX, you can make use of the advantages
of telemetry. A prerequisite for this is the use of a teleme-
try-capable M-LINK 2.4 GHz receiver and if necessary the
corresponding sensors.
The speech output of the telemetry values is integrated into
the transmitter. It receives the telemetry data from the model
completely independently of the transmitter and announces
the values as a speech output along with vario sounds and
warning signals.
We have made a great effort when writing these short instruc-
tions to ensure that you can quickly and easily nd the answer
to every question.
If, however, you still have an unanswered question about your
COCKPIT SX, please contact your retailer, who will be happy
to assist you.
You can nd the addresses of our service partners on our web-
site: www.multiplex-rc.de under CONTACT/SERVICE.
Video tag to MULTIPLEX videos
This QR code takes you straight to the COCKPIT SX
product video.
This QR code takes you straight to the COCKPIT SX
FAQ video.
9. Telemetry
10. Advice and technical support
8. Touch display/main menu
To Next Page
Loading...
Need help?
General
