Multiplex FreshBlender User Manual

Part Number: WBL-95-156 REV002 17
Component Identification
Refrigerated
Cabinet Door
Power Switch
Product Bins
(Inside Cabinet)
Product
Dispense Area
Drink Shuttle
& Rail
Front Panel
Keyed Lock
Touch Screen
Clear Splash
Shield &
Blending
Area
Sequence of Operation
NORMAL OPERATION
Drink Selection screen appears after power-up of the
unit. Operator presses one of the drink type buttons on
the Drink Selection screen, and the Flavor Options screen
appears. Once a flavor is selected a confirmation screen will
appear. When the user confirms the selection the on screen
instructions for cup location and drink size will then display.
See “Procedure to Make a Drink” on page 26.
With correct cup in place, the drink preparation sequence
commences when “Start Drink Size” is initiated through
the touch screen. The machine dispenses product and ice
into the cup in the dispense area. The cup is then placed
into isolated the blend chamber by the automatic shuttle
system.
The machine blends the drink for the correct time at the
proper blender speed. If add-ins are required for the drink
after blending, the user will be prompted. The blender
completes the blend sequence and the shuttle system
moves the completed drink back into the dispense area
where the customer can now retrieve it.
After the drink is removed the automatic rinse of the
blender and dispense area initiates. The Drink Selection
screen re-appears.
Default Temperature
ControlSetting
34°F/1°C set point
4°F/.5°C differential
controlled by software
Section 3
Operation

Multiplex FreshBlender Specifications

General

Brand	Multiplex
Model	FreshBlender
Category	Dispenser
Language	English