Appendix A Device-Specific Information
© National Instruments Corporation A-7 NI USB-621x User Manual
USB 6218
USB 6218 Pinout
Figure A-3 shows the pinout of the NI 6218.
For a detailed description of each signal, refer to the I/O Connector Signal
Descriptions section of Chapter 3, Connector Information.
Single-blink Operating normally. Connected to
USB Hi-Speed port. Refer to the
NI 621x Specifications for more
information.
Double-blink Connected to USB full speed port.
Device performance might be
affected. Refer to the NI 621x
Specifications for more
information.
Table A-4. PWR/ACT LED Status (Continued)
LED State Device Status