Table 2: Device socket overview for Docking Station and Multi-Data Cable
3.4.4 Charging the Device
Connect the Multi-Data Cable to the device (see section 3.4.3: Device Cable Connectors). For charging
the device, connect the power supply to the power supply outlet and plug it to a power mains socket
with appropriate output voltage and frequency. For more information about power supply units please
see section 9: Technical Specifications and information provided on the power supply unit. When using
a Docking Station, make sure that the power supply is connected to the Docking Station and to a power
mains socket. Simply slide the device into the Docking Station. The charging process starts
automatically and completes within about 5 - 8 hours. The battery status can be derived from the
status indicator from empty to full. The
battery status icon symbol: charging
Docking Station and the Multi-Data Cable will feature a LED indicating when the device is charging.
3.5 Device Functions
3.5.1 User Management
With the ALGOLink software you can activate or de-activate the user management on your device (see
ALGOLink online help for more information). If the user management is activated, after switching on
the device, you will be asked to select a user and to enter the user password. Please follow the
explanations on the device. If you would like to change a user you need to logoff from the device and
restart the device. If the user management is active, you are only enabled to change module
parameters when logged in as administrator.
Please make sure that local data protection requirements are met. When user management
is deactivated on ALGO 7i device, the device does not provide any inherent access protection
(i.e. no login with password).
To Next Page
Loading...
Need help?
General
