natus Algo 7i User Manual

Page 35/40
9 Technical Specifications
This section provides a summary of the most important technical specifications.
9.1 General Device Information
Device classification (93/42/EEC,
745/2017)
Class II a
Applied part classification
Applied parts
Type BF (body floating)
ATA Cable, Patient Cable
Ingress protection rating (IP code)
IP30
Applied standards
DIN EN ISO 10993-1, -5, -10 (biocompatibility), DIN EN ISO
15223-1 (manual), DIN EN 60601-1 (electrical safety), DIN EN
60601-1-2 (EMC), DIN EN 60601-1-4 (PEMS), DIN EN 60601-
1-6 and DIN EN 62366 (usability), DIN EN 60601-2-40 (AEP
equipment), DIN EN 60645-3 (short-term test signals), DIN EN
60645-7 (ABR), DIN EN 62304 (software lifecycle)
9.2 Device Characteristics
Device dimension
ca. 209 x 98 x 52 mm (8.22 x 3.86 x 2.05’’)
Device weight (including battery pack)
ca. 500 g
Display properties
240 x 320 pixel, graphic LCD, 3.5‘‘
Maximum power consumption from
battery
ca. 4 V, 0.5 A = 2 W
Typical power consumption from
power supply unit during charging
ca. 12 V, 0.17 A = 2 W
9.3 Power Supply
For medical applications the following power supply units are exclusively allowed when used with
ALGO 7i devices:
• Friwo FW7662M/12

natus Algo 7i Specifications

General

Brand	natus
Model	Algo 7i
Category	Medical Equipment
Language	English