Keep small parts out of patient’s range in order to prevent accidental swallowing.
No parts may be eaten, burnt, or in any other way used for purposes other than specified
in the intended use.
The sockets are intended to connect to the respective accessories (ATA Cable, Patient
Cable, Multi-Data Cable). Do not connect any other item to these sockets. For correct
connections see section 3.4.3: Device Cable Connectors.
Do not try to insert any plug into a device socket with excessive force. A plug fits only into
a device socket if the mechanical coding of the plug is corresponding to the device socket.
Cables are color-coded to assist with selecting the correct device socket. See section
3.4.3: Device Cable Connectors.
When pulling a plug out of a socket always pull at the plug and not at the cable to avoid
cable break.
Do not expose the label printout to sunlight or heat. Printing on thermal paper fades with
exposure to light or heat.
The device includes a rechargeable lithium ion battery pack. Replacement of the battery
pack must be completed by an authorized service partner. The service partner is
responsible for the correct disposal and storage of the battery pack. Do not dispose of
the batteries in your normal household waste bin. Please follow your local regulations for
proper disposal.
Within the European Union, the device must not be disposed of in your normal household
waste bin since electronic waste may contain hazardous substances. The device is
electronic equipment covered by the Directive 2012/19/EC on waste electrical and
electronic equipment (WEEE). Please follow your local regulations for proper disposal of
the device and its accessories.
To Next Page
Loading...
Need help?
General
