NEC ITL-12D-1 - DT730 - 12 Button Display IP Phone User Manual

31
3. FEATURE OPERATION
TO ORIGINATE A CALL USING
SELECTIVE DIALING (DYNAMIC
DIAL PAD, PRESET DIAL)
Dynamic Dial Pad
Enter desired telephone number (Digit Keys 0-9, *,
and #).
LED on key lights and hear key touch tone.
The dialed number appears on the top of LCD.
Preset Dial
Enter desired telephone number(Digit Keys 0-9, *,
and #).
The dialed number appears on the top of LCD.
Lift handset or press key.
or
Press the originating Line Key and lift handset.
Note:
Pressing the Speaker Key or going off-hook is not
necessary.
DT730/710
DT330/310
Speaker
2000
MIC >>>
1:25 PM TUE 18 MAR 2008
DT730/710
DT330
2000
Clr Cnl
Input Dial Number
Note:
Originating call operation is cancelled by the fol-
lowing Soft Key operation;
- Press Exit key or Cancel Key.
- Press Clear Key and cancel by one digit.
Note:
This feature cannot use on ITL-2E-1.
Speaker

NEC ITL-12D-1 - DT730 - 12 Button Display IP Phone Specifications

General

Brand	NEC
Model	ITL-12D-1 - DT730 - 12 Button Display IP Phone
Category	Telephone
Language	English