NEC ITL-12D-1 - DT730 - 12 Button Display IP Phone User Manual

36
To Cancel
Press key. Receive dial tone. If canceling
for another station, press MULTILINE APPEAR-
ANCE.
Press FWD or dial “Call Forwarding – All Calls”
cancel code. Receive service set tone. LED goes
out at your station (or the DT Series of the multiline
station).
Press key. Call Forwarding – All Calls is
cancelled.
Using Soft Key
Press FDA Soft Key.
Receive service set tone and “FORWARD CAN-
CEL” is displayed.
CALL FORWARDING - BUSY LINE
To Set
Press key. Receive dial tone.
If setting for another station, press MULTILINE
APPEARANCE.
Press FWD-BY or dial “Call Forwarding – Busy
Line” access code. Receive special dial tone.
Dial destination station or external telephone num-
ber. Receive service set tone.
FWD-BY LED lights (at your station or at the DT
Series of the multiline station you are setting).
Press key. Call Forwarding – Busy Line is
set.
Note:
With Soft Key operation, FDB flashes on the dis-
play.
Forwarding
station
FORWARD 2000
1:25 PM TUE 18 MAR 2008
Speaker
Speaker
FORWARD CANCEL
1:25 PM TUE 18 MAR 2008
FORWARD CANCEL
MIC >>>
1:25 PM TUE 18 MAR 2008
DT730/710
DT330/310
Speaker
Speaker
FORWARD SET
1:25 PM TUE 18 MAR 2008

NEC ITL-12D-1 - DT730 - 12 Button Display IP Phone Specifications

General

Brand	NEC
Model	ITL-12D-1 - DT730 - 12 Button Display IP Phone
Category	Telephone
Language	English