NEC ITL-12D-1 - DT730 - 12 Button Display IP Phone User Manual

32
TO ORIGINATE A CALL USING
SPEED CALLING (ONE-TOUCH
SPEED CALLING KEYS)
Press the desired One-Touch Speed Calling key,
or press key and One-Touch Speed Call-
ing key.
To Program
(Available only on DT Series with One-Touch Speed
Calling key.)
Press key.
Press desired One-Touch Speed Calling key.
Enter desired telephone number or feature access
code on the keypad.
Display indicates the digits dialed.
Press key again to save the number.
To Verify
Press key.
Press desired One-Touch Speed Calling key.
Display indicates digits programmed.
Note:
To program a hook switch for transfer or feature
activation, press key as first digit. (! dis-
plays on LCD.)
DT730/710
DT330/310
Speaker
Feature
Feature
SPEED SET
1:25 PM TUE 18 MAR 2008
MIC DND >>>
Feature
Recall
Note:
To program a pause, press the key as
any digit other than the first digit. (– displays on
LCD.)
Note:
To program a Voice Call, press key after
dialing station number. (V displays on LCD.)
Note:
One-Touch Speed Calling key for feature access:
One-Touch Speed Calling key may be used as a
feature key by storing the feature access code.
The features may be programmed on a system
basis by the Telephony Server Admin.
Access codes may be stored in conjunction with
telephone numbers. For example, one button can
be programmed by the user to transfer to a certain
extension.
Recall
Transfer

NEC ITL-12D-1 - DT730 - 12 Button Display IP Phone Specifications

General

Brand	NEC
Model	ITL-12D-1 - DT730 - 12 Button Display IP Phone
Category	Telephone
Language	English