Web Based Configuration
Interface
First-time Setup Wizard
Please follow the steps below to configure your NF8AC Wireless router via the web based configuration wizard.
Open your web browser (e.g. Internet Explorer/Firefox/Safari) and type http://192.168.20.1/ into the address bar at the top of the
window.
At the login screen, type admin in the username and password field, then click the Login button.
Note:
admin
is the default username and password for the unit.
1.
Click on Basic Setup on the left side of the screen. The wizard assists you in configuring the router and entering the
information required to setup your Internet connection.
2.
Select either VDSL or ADSL depending on your connection type and click Next.
ADSL:
3.
Select either PPP over Ethernet (PPPoE) or PPP over ATM (PPPoA) depending on your Internet Service Provider’s
requirements. Click Next.
4.
In the Username and Password fields, enter the username and password supplied to you by your Internet Service Provider
(ISP). If required by your ISP, you may also adjust the VPI and VCI figures here. Click the Finish button when you have
entered the required information.
To Next Page
Loading...
Need help?
General
