NetComm Wireless NF8AC User Guide
Technical Data
The following table lists the hardware specifications of the NF8AC.
G.992.2 (G.dmt), G.lite
G.992.3 (G.bis/ADS L2)
G.992.5 (ADSL2+)
Annex A
Annex L (Reach Extended ADSL2)
Supports ATM forum UNI3.0, 3.1 and 4.0 permanent virtual circuits (PVCs)
Supports CBR, UBR, VBR-rt, VBR-nrt
Supports multiple PVCs
Supports ITU-T i.610F4/F5 OAM
Supports 8a, 8b, 12a, 12b and 17a profile
1 x Gigabit WAN port (10/100/1000 Mbps)
4 x 10/100/1000 Mbps, 1 x RJ-11 ADSL, 1 x WLAN
Power, ADSL, WWW, LAN 1-4, WAN, WiFi.
Operating temperature: 0˚C - 40˚C, Humidity: 10%-90% non-condensing
Storage temperature: -10˚C - 60˚C, Humidity: 0%-95% non-condensing
190 mm (L) x 146 mm (H) x 33 mm (D)
Electrical Specifications
It is recommended that the NF8AC be powered by the supplied 12V DC, 2A power supply. A replacement power supply is available
from the NetComm Wireless Online shop.
Environmental Specifications / Tolerances
The NF8AC housing enables it to operate over a wide variety of temperatures from 0˚C - 40˚C (operating temperature).