Nice Mercury 310 User Manual

1818
support.hysecurity.com
MERCURY 310 Controller
User Guide
5. OXI RADIO-REMOTE PROGRAMMING
If OXIBD/A receiver module is installed, program transmitters (remote controls) for gate operation as described:
Used to program a remote control button to operate like a garage door
opener (1st press = Open, 2nd press = STOP, 3rd press = CLOSE). To
program:
1. Press and hold the desired button on the remote control.
2. Within 2 seconds press & release the STEP button on the Mercury.
If programming is successful, dn (done) is displayed, the Step LED will
ash twice, and the alarm will chirp for successful pairing. If programming
fails, error code
ER + 08 is displayed.
Used to program a remote control button to open the gate:
1. Press and hold the desired button on the remote control.
2. Within 2 seconds press & release the OPEN button on the Mercury.
If programming is successful, dn (done) is displayed, the Open LED will
ash twice, and the alarm will chirp for successful pairing. If programming
fails, error code
ER + 08 is displayed.
Programs remote button to “latch” gate in open or closed position until button is pressed a second time.
1. Press and hold the desired button on the remote control.
2. Within 2 seconds, press and release the LATCH button on the Mercury.
If programming is successful, dn (done) is displayed, the Latch LED will ash twice, and the alarm will chirp
for successful pairing. If programming fails, error code
ER + 08 is displayed.
NOTICE
Latch function will be ignored on a moving gate or a gate stopped in mid-travel. The audio alarm will “chirp”
whenever Latch transmitter is activated or gate is locked and an operate command is received and ignored.
IMPORTANT NOTICE
Transmitters (remote controls) must be “learned” by the OXIBD/A radio receiver before other radio accessories
(i.e. wireless keypads) to avoid errors. To reset in event of an error, press & hold down Program button (on
OXIBD/A top) and release after green LED ashes ve times, then re-learn a remote before other devices.
OXIBD/A Radio
Receiver
& 2-Button
Remote
NOTICE
The Open function will only open a gate or reverse a closing gate; it will
not have any e󰀨ect on a gate in Hard Shutdown.
STEP Button (Radio Channel)
OPEN Button (Radio Channel)
LATCH Button (Radio Channel)

Nice Mercury 310 Specifications

General

Brand	Nice
Model	Mercury 310
Category	Controller
Language	English