Nice ROBUS RB250HS Instructions And Warnings For Installation And Use

EN
22 – English
Led 1 Description
7.8) Accessories
The following optional accessories are available for ROBUS:
• SMXI or SMXIS 433.92MHz Radio receiver with digital Rolling code
(fig. 30).
• PS124 PS124 24 V Buffer battery - 1,2Ah with integrated charger
battery (fig. 31).
• SOLEMYO solar power system (for installation and hookup, refer to
the product’s user manual)
30
• Function programming in progress.
• If it flashes together with L4, it means that the user must carry out the leaf length recognition phase
(refer to Paragraph “4.4 Recognition length of the leaf”).
Led L6 Description
Led L5 Description
Led L3 Description
Led L2 Description
Led L4
Description
During normal operation the device indicates “Thrust” is not active.Off
Off During normal operation the device indicates “Automatic Closing” is not active
During normal operation the device indicates “Automatic Closing” is active.
•
Function programming in progress.
• If it flashes together with L2, it means that the user must carry out the device recognition phase (refer to
Paragraph “4.3 Recognition of the devices”).
On
It flashes
Off During normal operation the device indicates “Close after photo” is not active.
During normal operation the device indicates “Close after photo” is active.
• Function programming in progress.
• If it flashes together with L1, it means that the user must carry out the device recognition phase (refer to
Paragraph “4.3 Recognition of the devices”).
On
It flashes
Off During normal operation the device indicates “Always close” is not active.
During normal operation the device indicates “Always close” is active.
During normal operation the device indicates “Stand-by” is not active.
During normal operation the device indicates “Stand-by” is active.
• Function programming in progress.
• If it flashes together with L3, it means that the user must carry out the leaf length recognition phase
(refer to Paragraph “4.4 Recognition length of the leaf”).
On
It flashes
Off
On
It flashes
During normal operation the device indicates “Thrust” is active.
Function programming in progress.
On
It flashes
During normal operation the device indicates “Pre-flashing” is not active.
During normal operation the device indicates “Pre-flashing” is active.
Function programming in progress.
Off
On
It flashes
Led L7 Description
During normal operation the device indicates that the CLOSE input activates a closing manoeuvre.
During normal operation the device indicates that the CLOSE input activates a partial opening manoeuvre.
Function programming in progress.
Off
On
It flashes
Led L8 Description
During normal operation the device indicates that ROBUS is configured as Master.
During normal operation the device indicates that ROBUS is configured as Slave.
Function programming in progress.
Off
On
It flashes
Table 21: LED’s on the control unit’s keys
31

Nice ROBUS RB250HS Specifications

General

Brand	Nice
Model	ROBUS RB250HS
Category	Garage Door Opener
Language	English