Nice SN6031 User Manual

English – 5
1
PRODUCT DESCRIPTION AND INTENDED USE
SPIN is a family of electromechanical gearmotors with integrated control unit, designed for automating sectional and spring-loaded or counter-
VDHFGSDCNUDQGD@CCNNQRVGDSGDQOQNSQTCHMFNQMNSjFSGD2/ @BBDRRNQXHRQDPTHQDCENQNUDQGD@CF@Q@FDCNNQR
The control unit is equipped for installation of a 433.92 MHz radio receiver with FLOR coding.
The SPIN line includes the products listed in Table 1.
WARNING! – All uses other than the intended use described and use in environmental conditions other than those described in
this manual should be considered improper and forbidden!
Table 1 - Description of the SPIN components
Model: Gearmotor Guide Radio receiver Radio Transmitter
SPIN20KCER10 SN6021 3x1m OXI FLO2RE
SPIN22KCER10 SN6021 4m OXI FLO2RE
SPIN23KCER10 SN6021 3m OXI FLO2RE
SPIN30R10 SN6031 3x1m --- ---
SN6031R10 SN6031 --- --- ---
SPIN40R10 SN6041 3x1m --- ---
SN6041R10 SN6041 --- --- ---
SN6031R10 must be completed with the guides SNA30/SNA30C (3m) or SNA30/SNA30C + SNA31/SNA31C (3m + 1m).
SN6031R10 must be completed with the guide SNA30/SNA30C (3m) or SNA30/SNA30C + SNA31/SNA31C (3m + 1m).
SPIN30R10; SPIN40R10; SN6031R10 e SN6041R10 can be completed with radio receivers OXI and relative radio transmitters.
2
OPERATING LIMITS
Chapter 13 “Technical Characteristics” provides the data needed to determine whether the products of the SPIN line are suitable for the intended
application.
The structural characteristics of the SPIN products make it suitable for use on sectional and overhead doors within the limits shown in Tables
2, 3 and 4.
Table 2 - gearmotor operating limits
Model: Sectional doors
Non-protruding overhead
doors (with accessory SPA5)
Protruding overhead doors
(with accessory SPA5) or with
springs (without SPA5)
Width (m) x
Height (m)
Surface (sqm) Width (m) x
Height (m)
Surface (sqm) Width (m) x
Height (m)
Surface (sqm)
SPIN20KCER10 4,4x2,4 10,5mq 4,2x2,2 9,2mq 4,2x2,8 11,8mq
SPIN22KCER10 3x3,4 10,2mq 2,9x3,2 9,2mq 3,4x3,5 11,8mq
SPIN23KCER10 4,4x2,4 10,5mq 4,2x2,2 9,2mq 4,2x2,8 11,8mq
SPIN30R10 5x2,4 12mq 4,2x2,2 9,2mq 4,2x2,8 11,8mq
SN6031R10 3,5x3,4 12mq 2,9x3,2 9,2mq 3,4x3,5 11,8mq
SPIN40R10 5,2x2,4 12,5mq 4,2x2,2 9,2mq 4,2x2,8 11,8mq
SN6041R10 5,2x3,4 17,5mq 4,2x3,2 13,4mq 4,2x3,5 14,7mq
WARNING! – All uses other than the intended use described and use in environmental conditions other than those described in
this manual should be considered improper and forbidden!

Nice SN6031 Specifications

General

Brand	Nice
Model	SN6031
Category	Garage Door Opener
Language	English