1
Table of contents: pag.
1 Product description 2
2 Installation 2
2.1 Preliminary checks 2
2.2 Limits of use 2
2.3 Assembly 3
2.3.1 Fitting the rear bracket 3
2.3.2 Fitting the front bracket 4
2.3.3 Opening the gate outwards 4
2.4 Typical system layout 5
2.5 Connecting the gear motor 5
pag.
3 Manual manoeuvre or release 6
4 Testing 6
5 Maintenance 6
5.1 Disposal 6
6 Technical specifications 6
6.1 Models and characteristics 6
Instructions and warnings for
users of the WINGO gear motor 7
wingo
Important information
Congratulations on choosing this Nice product. Please read this
handbook carefully.
To make these instructions easier to follow, we have, wherever possible,
put them in the order in which they will be carried out during the various
system installation phases.
Please read these instructions and the attached “Warnings for fitters” file
carefully before installing the product as they contain important
information concerning safety, installation, use and maintenance.
Anything not expressly specified in these instructions is forbidden.
Operations not indicated in these instructions may cause damage to the
product, people and property.
Nice declines all liability for badly built gates or any deformations that may
occur during use.
Do not install the product in explosive atmospheres.
GB
To Next Page
Loading...
Need help?
General
