119
n
Shooting (All Modes)
The camera takes time to turn on: Delete files or format the memory card.
The shutter-release is disabled:
• The battery is exhausted (0 4, 20).
• The memory card is full.
• The flash is charging (0 83).
• The camera is not in focus (0 33).
• You are currently filming a slow-motion movie (0 52).
Only one picture is taken each time the shutter-release button is pressed in continuous
release mode: I is selected in continuous mode (0 75) and flash lighting
is used.
No photo taken when ML-L3 remote control shutter-release button is pressed:
• Replace battery in remote control (0 110).
• Choose a remote control mode (0 79).
• The remote control standby timer has expired (0 102).
• The remote is not pointed at the camera or the infrared receiver is not
visible (0 2, 80).
• The remote is too far from the camera (0 80).
• Bright light is interfering with remote.
Smudges appear in photographs: Clean the front and rear lens elements.
Flicker or banding appears in movies or in the display: Choose a Flicker reduc-
tion setting that matches the local AC power supply (0 102).
No flash: The built-in flash and optional flash units will not fire during
movie recording (0 48) or live image control (0 37), in best moment
capture (0 61), Motion Snapshot (0 71), advanced movie (0 51), cre-
ative palette (0 41), or easy panorama (0 43) modes, or when HDR is on
(0 42), a frame rate of 10 fps or higher is selected in continuous mode
(0 75), or 6400 (NR) or 12800 (NR) is selected for ISO sensitivity
(0 101).
Menu items are unavailable: Some options are only available in particular
shooting or exposure modes.
To Next Page
Loading...
Need help?
General
