45
One-Touch Portrait Mode
The One-Touch Portrait Menu
Press m in one-touch portrait mode to display
the one-touch portrait menu. Options chosen in
this menu are restored next time this mode is
selected.
j Face-Priority AF
The camera’s ability to detect faces depends on a variety of factors, including whether or not
the subject is facing the camera. The camera focuses continuously until a face is detected.
If the yellow double border blinks when the shutter-release button is pressed halfway, the
camera was unable to focus. Release the button and try again. If no face is recognized when
the shutter-release button is pressed halfway, the camera focuses on the center of the frame.
The camera may be unable to detect faces in the following situations:
• When faces are partially hidden by sunglasses or other obstructions
• When faces take up too much or too little of the frame
k Settings for One-Touch Portrait Mode
• Flash: Changeable
• Self-timer: Available
• Macro close-up: Off
Z Set up
Display setup menu (c 94).
Z Image mode (default: Normal(2816))
Choose an image size and quality (c 77).
One-touch portrait
Exit
Set up
Image mode
To Next Page
Loading...
Need help?
General
