63
Connecting to Televisions, Computers, and Printers
Connecting to a TV
Connect the camera to a television using the A/V cable to play back pictures
on the television.
1 Choose [NTSC] or [PAL] to match your TV
video standard (c 106) and then turn off
the camera.
2 Connect the A/V cable.
Connect the yellow plug to the video-in jack on the TV, and the white plug to the
audio-in jack.
3 Tune the television to the video channel.
See the documentation provided with your television for details.
4 Press o for one second to turn on
the camera.
The camera monitor will remain off and the image
normally shown in the monitor will be displayed on
the television.
j Connecting an A/V Cable
• When connecting the A/V cable, be sure that the camera connector is oriented correctly.
Do not use force when connecting the A/V cable to the camera. When disconnecting the
A/V cable, do not pull the connector at an angle.
• Do not pinch the connector cover between the camera’s A/V connector and the A/V cable
connector when connecting the cable to the camera.
Video mode
Exit
NTSC
PAL
WhiteYellow
To Next Page
Loading...
Need help?
General
