2. Mount Prism Box on Front Body
�
�
ANGLE ADJUSTMENT OF MAIN MIRROR AND SUB MIRROR TO 45
Collimator
Lens mount
Optical parallel
Main mirror
eccentric pin
Mirror of J18324
Sub mirror
Sub mirror eccentric pin
Main mirror
J18197
Use tools
Angle adjustment of main mirror
Collimator
J19002
Mirror angle inspection mirror
J18197
Optical parallel
J18037
Hexagonal wrench
Angle adjustment of sub mirror
Collimator
J19002
Sub mirror angle adjustment
tool (J18324
Hexagonal Wrench
Note : Adjust the followings after mounting the prism box
to the front body as described page A11.