VBA10201-R.3577.A
- -
Disassembling
…………………………………………………………………………… D1
……………………………………………………………………… D1
…………………………………………………… D2
…………………………………………………………… D2
…………………………………………… D3
………………………………………… D3
………………………………………… D4
…………………………………………………………………… D4
………………………………………………………………… D5
…………………………………………… D6
……………………………………………………………… D6
……………………………………………………………… D7
…………………………………………………… D7
…………………………………………………………… D8
…………………………………………………………………… D8
………………………………………… D9
……………………………………… D9
……………………………………………………………… D10
……………………………………………………………………………… D10
…………………………………………… D11
…………………………… D11
…………………………………………………………… D12
………………………………… D13
…………………………………………… D14
Cautions
1. SEPARATION OF THE FRONT BODY FROM THE REAR BODY
Bottom Cover
Back Cover
1. Removal of Connection FPC
2. Removal of Screws
3. Discharging from Main Condenser
Memory Compression PCB Unit
1. Disconnection of FPCs from connector
2. Removal of Memory Compression PCB
CCD PCB Unit
DC/DC PCB Unit
Front Cover, Grip Cover and I/F Cover
Top Cover
1. Removal of Wires
2. Removal of Screws
3. Removal of wires and FPCs
Power Drive PCB Unit
Main Condenser
Separation of Front Body and Rear body
2. FRONT BODY
Shutter
1. Mirror-up, Removal of soldering bridges
2. Removal of Shutter
SQ FPC
Main FPC
1. Removal of FPC from the connector
2. Removal of pressure welding and soldering bridges
3. Removal of Main FPC
Prism Box Unit
1. Removal of Prism Box Unit from Front Body
2. Disassembling of the Prism Box Unit