To Next Page

To Previous Page

Creating a DPOF Print Order: Print Set

The DPOF print order option is used to

create digital “print orders” for Pict-

Bridge-compatible printers and devices

that support DPOF. Press the G but-

ton, select DPOF print order in the play-

back menu, and choose from the

following options:

Select/

set

Press 4 or 2 or rotate the multi selec-

tor to highlight pictures (0 95). To

select the current picture for printing,

press 1. The picture will be marked

with a Z icon and the number of

prints will be set to 1; press 1 or 3 to

specify the number of prints (up to 99;

to deselect the picture, press 3 when the number of prints is 1).

When the selection is complete, press J to display printing

options. Highlight Print shooting info (print the shutter speed

and aperture on all pictures in the print order) or Print date

(print the date of recording on all pictures in the print order) and

press 2 to select or deselect, and then press J to complete the

print order.

Reset Remove all pictures from the print order.

Print Set (DPOF)

DPOF date and shooting info options are not supported when printing

via direct USB connection; to print the date of recording on photo-

graphs in the current print order, use the PictBridge Print time stamp

option (0 91).

The Print set (DPOF) option can not be used if there is not enough

space on the memory card to store the print order. For restrictions on

the types of images that can be selected for printing, see page 87.

Print orders may not print correctly if images are deleted using a com-

puter or other device after the print order is created.

Nikon Digital Camera User Manual

Questions and Answers: