Nilfisk-Advance SC4000 User Manual

9/2022 A - 21 56091272 - Advance SC4000
ENGLISH - AINSTRUCTIONS FOR USE
SQUEEGEE INSTALLATION
1 See Figure 2-7. Ensure the Squeegee Seal (AA) is free from debris and installed on the Squeegee Assembly (33). Lift the squeegee
assembly and slide it onto the Squeegee Mount (AB) and tighten the Squeegee Mount Thumb Nuts (31).
2 Connect the Recovery Hose (29) to the squeegee mount (AB).
3 Lower the squeegee and move the machine ahead slightly. Check that the rear squeegee blade touches the oor evenly across its entire
width and is bent over slightly as shown in the squeegee cross section (AC). If necessary adjust the rear squeegee to the proper height and
tilt by following the steps in the “Squeegee Adjustment” section.
FIGURE 2-7
AA
AB
31
29
31
33
AC

Nilfisk-Advance SC4000 Specifications

General

Brand	Nilfisk-Advance
Model	SC4000
Category	Scrubber
Language	English