7368 ISAM ONT E-240G-B Product Guide Replace an E-240G-B ONU
Issue: 01 3FE-46261-AAAA-TCZZA 81
7 Replace an E-240G-B ONU
7.1 Purpose
7.2 General
7.3 Prerequisites
7.4 Recommended tools
7.5 Safety information
7.6 ONU replacement procedure
7.7 ONU replacement in an MNTS-A shelf
7.1 Purpose
This chapter provides the steps to replace an E-240G-B ONU.
7.2 General
The steps listed in this chapter describe mounting and cabling for the E-240G-B
ONU.
For more information about installing EPON ONUs, see the Operations and
Commands manuals for your OLT.
7.3 Prerequisites
The prerequisites are:
• The ONU software version must be in the NT file system.
• All required cables must be present.
7.4 Recommended tools
You need the following tools for replacing the ONU:
• #2 Phillips screwdriver
• 1/4 in. (6 mm) flat blade screwdriver
Release 06.01.01 | June 2019 | Edition 09