To Next Page

To Previous Page

Menu functions

Start-up tone

To set the phone to play or not to play a start-up tone when the phone is switched on, press Menu,

select Settings, Phone settings and Start-up tone.

If you have set a welcome note, the start-up tone will not be played, see Welcome note on page 50.

Tone settings

Press Menu, select Settings and then Tone settings. You can find the same settings in the Profiles

menu, see Profiles (Menu 3) on page 45.

Select Incoming call alert to choose how the phone notifies you of an incoming voice call. The options

are Ringing, Ascending, Ring once, Beep once and Off. The phone does not ring at an incoming call or a

text message when Incoming call alert is set to Off and Message alert tone is set to Off. The indicator

is displayed.

Select Ringing tone, Ringing volume and Vibrating alert for an incoming voice call and an incoming

message. The vibrating alert does not work when the phone is connected to a charger, desktop stand,

or a car kit.

Tip: If you receive a ringing tone via IR or OTA, you can save ten ringing tones at a time in the

ringing tone list.

Select Message alert tone to set the alert tone for the incoming messages, Keypad tones, or Warning

tones to set the phone to sound tones, for example, when the battery is running out of power.

Select Alert for to set the phone to ring only for calls from phone numbers that belong to a selected

caller group. Scroll to the caller group you want or All calls and press Mark.

Nokia 8910 User Manual

Other manuals for Nokia 8910