©2002 Nokia Corporation. All rights reserved.
Menu functions
66
You can select Continue if the timing was set in the background, for example, because of an
incoming call.
2. Press Start to start the time observation. Press Split every time you want to take an intermediate
time. The intermediate times are listed below the running time on the display. Scroll to view the
times.
3. Press Stop to stop the time observation.
4. Press Options and select
Start to start the time observation again. The new time is added to the previous time.
Save to save the time. Key in a name for the measured time and press OK. If no name is keyed in, the
total time is used as a title.
Reset to reset the time without saving it.
Lap times
Press Menu, select Extras, Stopwatch and Lap timing. Press Start to start the time observation and Lap
to take a lap time. Press Stop to stop the lap timing. Press Options and you can save or reset the lap
times. Refer to Time observation and time splitting above.
Viewing and erasing times
Press Menu, select Extras, and Stopwatch.
If the stopwatch is not reset, you can select Show last to view the most recently measured time. Select
View times and a list of names or final times of the time sets is shown, select the time set you want to
view.
To delete the saved times, press Options and select Erase times. Select All at once and press OK, or
select One by one and scroll to the times you want to delete. Press Erase and press OK.
To Next Page
Loading...
Need help?
General
