©2002 Nokia Corporation. All rights reserved.
Menu functions
53
Menu functions
• Scroll to Alias for access point and press Rename. Key in the name you would like for the activated
access point and press OK.
• Scroll to GPRS access point and press Edit. Key in the Access Point Name (APN) and press OK.
An Access Point Name is needed to establish a connection to the GPRS network. You can obtain the
Access Point Name from your network operator or service provider.
When a GPRS modem connection is established, the indicator is shown. The is replaced with the
indicator if there is an incoming or outgoing call during a GPRS modem connection, and the GPRS
connection is suspended.
You can also set the GPRS modem service settings (Access Point Name) on your PC by using the Nokia
Modem Options software, see Modem setup on page 79. If you have set the settings on your PC and
your phone, note that the settings made on the PC will be used.
Security settings
Note: When security features, which restrict calls, are in use (call barring, closed user group and fixed
dialling), calls may be possible to certain emergency numbers in some networks (e.g. 112 or other official
emergency number).
Press Menu, select Settings and Security settings. Select
• PIN code request to set the phone to ask for your PIN code every time the phone is switched on.
Some SIM cards do not allow the PIN code request to be turned off.
• Call barring service (network service) to restrict incoming calls to and outgoing calls from your
phone. A barring password is required.
• Fixed dialling to restrict your outgoing calls to selected phone numbers, if this function is supported
by your SIM card. The PIN2 code is required.
To Next Page
Loading...
Need help?
General
