Nokia A032 Getting Started Guide

12
Nokia A032 Getting Started
If you are not getting good coverage try
moving the Nokia A032 to a new location or
fitting an external antenna.
Installing the wireless LAN card
The Nokia C111 Wireless LAN Card conforms to
the PCMCIA type II specification.
1 Insert the card into the PCMCIA slot at the
rear of the unit:
2 Take care to ensure that the card is aligned
correctly and pressed all the way into the
slot.
After you’ve installed the wireless LAN card,
you shouldn’t need to remove it again.
If you do want to remove the card, switch off the
power and pull gently on the end of the card
which protrudes from the unit.
Note: Install the
wireless LAN card
before powering the
unit up, otherwise the
unit will not initialize
properly, and you’ll
have to restart it.

Nokia A032 Specifications

General

Brand	Nokia
Model	A032
Category	Wireless Access Point
Language	English