Nokia A032 Getting Started Guide

Supplementary information
33
Configuring devices to accept automatic IP
addresses
By default, Windows clients are set to accept IP
addresses automatically. However, if a station
has subsequently been configured with IP
information, you’ll need to reset the defaults
before the Access Point DHCP server can
provide the correct configuration:
1 Use the Windows Network control panel to
set
Obtain an IP address automatically:
2 If necessary, delete any entries under the
Gateway and DNS Configuration tabs
(although DNS should still be enabled).

Nokia A032 Specifications

General

Brand	Nokia
Model	A032
Category	Wireless Access Point
Language	English