Nokia A032 Getting Started Guide

24
Nokia A032 Getting Started
Enabling dial-up networking
If you are going to be using the Nokia A032 to
provide automatic dial-up Internet access via a
modem:
1 Click
Enable the Internet Access field.
2 Fill in the following fields:
ISP Phone Number
ISP Logon Name
(case-sensitive)
ISP Password (case-sensitive)
3 Click
Enter.
Don’t worry if you miss out this step now. You
can always switch on dial-up networking later
(see Basic Access Point setup and Basic
Internet Access setup in the Advanced User
Guide).
Restarting the Nokia A032 in Normal mode
To restart the Nokia A032:
1 Click
Restart Access Point in the web
configuration page to update the
configuration and return to Normal mode.
2 Wait until the Nokia A032 has restarted and
the LEDs have stopped flashing.
3 Re-boot your wireless station prior to
accessing the Nokia A032 again.
Note: Entering these
details carefully could
save you problems
later on!
Important: Don’t miss
out this step.

Nokia A032 Specifications

General

Brand	Nokia
Model	A032
Category	Wireless Access Point
Language	English