Nokia A032 Getting Started Guide

18
Nokia A032 Getting Started
Before you begin
Before you follow the instructions in this
chapter, you’ll need:
• A wireless station with a compatible
wireless LAN card installed. The wireless
station needs to be configured as follows:
• The station’s Network Name should
match that of the Nokia A032 (the
default is
Nokia WLAN).
• The station should have a standard Web
browser installed (such as Microsoft
Internet Explorer or Netscape Navigator).
• The station must be running the TCP/IP
networking protocol.
• The station must have any WEP security
features disabled. Please see the manual
supplied with your wireless station for
instructions.
• A suitable IP address which you can assign
to the Nokia A032.
You’ll need the above information when
you get to Configuring TCP/IP settings on
page 22.
• The IP address of a computer on your wired
LAN, so that you can test the Nokia A032 is
working properly.
If you’re not sure about any of the above,
please ask your network administrator for
advice.
Important note on IP
addresses

Nokia A032 Specifications

General

Brand	Nokia
Model	A032
Category	Wireless Access Point
Language	English