Nokia XS-2426G-B User Manual

2
Configure the following parameters:
Table 8-13 WAN parameters
Field Description
WAN connection list Select a WAN connection from the list to set the connection parameters.
Enabled Tap the Enable / Disable toggle to enable or disable the WAN connection.
Connection type Select a connection type: IPoE or PPPoE.
Connection mode Select the connection mode of the WAN connection:
• Route mode
• Bridge mode
IP mode Select an IP mode from the list: IPv4 or IPv6.
Enable Click to enable the WAN connection.
NAT Select this checkbox to enable NAT.
Service Enable/disable the following service types for this connection as required.
• VOIP
• TR-069
• INTERNET
• IPTV
Enable VLAN Tap the Enable/disable toggle enable VLAN.
VLAN ID Enter the VLAN ID.
VLAN PRI Enter the VLAN PRI.
WAN IP Mode Select an IP mode from the list.
Manual DNS Enter the Domain Name Server (DNS) to be confirgured manually.
Custom primary DNS Enter the primary Domain Name Server (DNS).
Custom secondary DNS Enter the secondary Domain Name Server (DNS).
Connection Type: PPPoE
Connection trigger Select the connection trigger type from the drop down list. The default option is Always On.
Userrname Enter the username to login to the configuration server.
Password
1
Enter the password to login to the configuration server.
Keep Alive Time The PPPoE connection type triggers one heartbeat each, between 5 to 60 seconds to keep the
session online.
Enter the value between 5 to 60 seconds depending on the configuration type.
Keep Alive Retry The PPPoE connection type sends out several heartbeats as retry time between 1 to 10 times.
Enter the value between 1 to 10 times as required.
Configure a XS-2426G-B indoor ONT
Network configuration
Configuring WAN
Nokia ONT
Review Review
© 2021 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3FE-49546-AAAA-TCZZA
December 2021
102 Issue 1

Nokia XS-2426G-B Specifications

General

Brand	Nokia
Model	XS-2426G-B
Category	Network Hardware
Language	English