1
1
2
4
3
A
B
SUCTION SIDE
Please be reminded to collect cleaning water in
specific containers. Containers to be collected
by authorised companies for the disposal of
waste waters.
- Pump to be
packed into palleti-
sed crate; pump to
be nailed to the
base in the vertical
position.
-
The cleaning procedure must be repeated for at
least 5 minutes.
-
Continue cleaning through
discharge port, maintaining
the connections horizontal.
SUCTION SIDE
-
Flush with water through the pump suction port
(motor opposite side).
-
Operator to be at least 2 metres away from pump.
-
Place the pump on
the floor, in a suita-
ble area for waste
water collection,
with the inlet and
outlet ports horizon-
tal.
A - Close terminal box cover and seal cable entry with PG plugs.
B- If there are no PG plugs available, the terminal box must be sealed
with adhesive waterproof tape.
-Sostituire il “TAPPO CON FORO” con il “TAPPO CIECO” fornito in dota-
zione con la pompa.
Pumps to be sent with cleanness certificate, so free from
any chemical trace into liquid end and all wetted parts.
If not supplied, pump (s) will be rejected and
sent back at customer’s charges.
MANDATORY REQUIREMENT
Basic suggestion for pump cleaning
C A U T I O N !
OBL s.r.l. welcome pumps despatched to our premises for servicing.
INFORMATION FOR CUSTOMERS
To Next Page
Loading...
Need help?
General
