18 Terms of Warranty and Servicing
Instruction Manual Pentacam® AXL (G/70100/EN 1121 Rev04) 71 / 85
18.2 Assumption of Liability for Functions and Damage
OCULUS will only accept responsibility for the safety, reliability and
serviceability of the Pentacam® AXL if the unit is used in compliance with
the following terms:
Only use the equipment in conformance with this instruction
manual.
There are no parts either on or inside the Pentacam® AXL that
require maintenance or repair by the user. If assembly work,
modifications, adjustments, repairs, changes or service are
performed by unauthorized personnel, or if the Pentacam® AXL is
improperly maintained or handled, then any liability by OCULUS is
voided.
If the above-referenced work is performed by authorized persons,
request a certification of the scope and type of repair, and, if
necessary, the changes to the standard values or to the operating
range from the service technician. This certification must contain
the date of performance and statement of the performing firm, with
signature.
If requested, OCULUS will provide the service technician with a list
of spare parts and additional descriptive material for this purpose.
Make certain that only original OCULUS parts are used.
18.3 Manufacturer and Service Address
Supplemental information is available from our Service Department or
from our authorized representatives.
Manufacturer and Service address:
OCULUS Optikgeräte GmbH
Münchholzhäuser Straße 29
35582 Wetzlar
GERMANY
Tel.: +49 641 2005-0
Fax: +49 641 2005-295
E-mail: export@oculus.de
www.oculus.de
USA:
OCULUS, Inc.
17721 59th Avenue NE
Arlington
WA 98223
Tel. +1 425 670 9977
Fax +1 425 670 0742
E-mail: sales@oculususa.com
http://www.oculususa.com
To Next Page
Loading...
Need help?
General
