10 2 Printing Through LPD or Port9100
2 Printing Through LPD or Port9100
2.1 Installation Procedure for Printing
Through LPD or Port9100
This section explains the installation procedure for printing from a Windows NT
®
4.0/
Windows
®
2000/Windows
®
XP/Windows Server™ 2003 computer through LPD or
Port9100.
System Configuration
As the printer supports the LPD and Port9100 protocol, you can print directly from Windows
NT 4.0/Windows 2000/Windows XP/Windows Server 2003 computer through the OS
standard LPR port (standard TCP/IP port for Windows 2000/Windows XP/Windows Server
2003).
The transport protocol for LPD and Port9100 can be TCP/IP.
You will need to set up the IP address on the printer and the Windows NT 4.0/Windows
2000/Windows XP/Windows Server 2003 computer. And once the printer registered on the
Windows NT 4.0/Windows 2000/Windows XP/Windows Server 2003 computer is shared,
you can also print from Windows 95/Windows 98/Windows Me computers through this
printer.
Note
• Only Windows 2000/Windows XP/Windows Server 2003 support printing through Port 9100.
• When the LPD port is used, the printer can limit print instructions by IP addresses. For details, refer to
the User Guide.
Target Computers
The following computers support printing through LPD or Port9100:
Connection OS Service/Client Protocol
LPD port Windows NT 4.0 Microsoft TCP/IP Printing TCP/IP
LPD port
Port9100 port
Windows 2000
Windows XP
Windows Server
2003
- Internet protocol (TCP/IP)
Windows NT 4.0/Windows 2000/Windows XP/
Windows Server 2003
LPD or Port9100 (TCP/IP)
To Next Page
Loading...
Need help?
General
