10.4 Using EtherTalk 61
When “Please reboot printer” Appears
Unable to Obtain Desired Print Results
No Notification
This section provides information on the possible causes, verifying methods and
recommended actions when there are no messages on the computers which have been
sent print instructions.
No Notification of Printer Errors
No End-of-job Notification
10.4 Using EtherTalk
This section provides information on the possible causes, verifying methods and
recommended actions pertaining to errors which may occur when the printer is used with
EtherTalk.
Cause Verification Action
An error occurs in the
NetWare interface.
- Switch off the printer, then switch it on again.
Cause Verification Action
The print language of the
print job and that set up at
the printer are different.
Check the print language of the printer. Set the same print language for the print job
and the printer.
Cause Verification Action
Not registered in the Notify
Candidate List of the print
server.
Using PCONSOLE from the
computer, check
if the user name and
group name are
registered in [Print
Server Information] >
[Printer] > [Printer
xxx Environment Settings]
> [Notify].
Register the user name and group name in
[Notify].
Cause Verification Action
When sending jobs from
the computer, the NOTIFY
option has not been
specified.
Check if the NOTIFY option is specified when
jobs are sent.
When jobs are sent, specify the NOTIFY
option.
The NetWare CASTOFF
utility is executed on the
computer.
- Execute the NetWare CASTON utility on the
computer.