20 4 Printing Through SMB
Example of [Config.txt] File
4.3 Auto Driver Downloading
When installing printer driver to Windows 95/Windows 98/Windows Me computer, you can
define the settings to use the auto driver downloading feature.
Note
• This feature is not applicable to Windows NT 4.0/Windows 2000/Windows XP/Windows Server 2003.
• Installation of the hard disk (optional) is required to use the auto driver downloading feature.
Preparation for Auto Driver Downloading
The following procedure explains the preparations needed in order to use the auto driver
downloading feature. Only the administrator can define this setting. The procedure here
explains with Windows XP as an example.
1. Open [My Network Places] from the Windows computer, followed by [Workgroup]
(default: [Workgroup]) and then the printer.
Note
• The factory default of the host name of the printer is “OKI-xxxxxx” (where xxxxxx is the last six
characters of the printer Mac address). Ask your system administrator for the current setting.
Location Specify the information about the printer’s
location.
Maximum 48 bytes
Reboot Printer will be rebooted after the editing of
the config.txt parameter setting file if set to
Yes .
Usually set to No when activated.
Machine will not be rebooted even if it is set
to Yes if there is an error in the setting.
Yes/ N o No
Item Remarks Value Factory default
To Next Page
Loading...
Need help?
General
