22 4 Printing Through SMB
Auto Downloading of Printer Driver
The following procedure explains how to use this auto driver downloading feature to install
the printer driver to the computer. We will install the PCL printer driver to Windows 98 as an
example.
1. Open [Network Neighborhood] from the Windows computer, followed by [Workgroup]
(default: [Workgroup]) and the printer. Then, select the new printer icon that has been
added.
Note
• The factory default of Workgroup is “Workgroup” and host name of the printer is “OKI-xxxxxx” (where
xxxxxx is the last six characters of the printer Mac address). Ask your system administrator for the
current setting.
2. When the message to confirm whether or not to continue the operation is displayed,
select [Yes].
3. Follow the on-screen messages to complete installation of the printer driver.
4. The printer icon of the newly installed printer is added to the [Printers] window and the
printer is now ready for use.
Make settings for the options mounted on the printer.
Refer to
• Online Help for the printer driver
To Next Page
Loading...
Need help?
General
