Oki MB451 User Manual

Basic Procedure for Faxing
-86-
Specifying a Destination
You can specify a destination in the following six
ways:
 Using the ten-key pad
 Using a speed dial
 Using a group
 Using the transmission histories
 Using the reception histories
 Using the one-touch key pad
Perform the following procedures at step 5 of
"Sending a Fax" P. 85 described above.
Direct Input
You can enter a destination fax number directly
by using the ten-key pad. You can enter up to 40
digits.
1 Press the to select [Direct Input] and
then press .
2 Enter a destination fax number using the
ten-key pad on the operator panel.
3 Select [Enter] and then press .
Memo
 You can use the ten-key pad to enter a destination also on
the screen that is displayed after pressing the <FAX/
HOOK> key. In this case, the fax start screen appears
after entering a destination.
 Dialing Functions
You can use the following functions when
entering a destination fax number.
Select the function you want and then press on
the fax number entry screen.
 -(Hyphen)
Inserts a hyphen to the entered fax number.
 PreFix
Inserts a prefix number registered in advance.
"N" is inserted when entering.
 Flash
Orders your PBX(Private Branch Exchange) to
connect you with PSTN(Public Switched
Telephone Network). When inputting, enter "F".
Enter "Pause" and "#" by pressing <#> on the
ten-key pad. When you press <#>, you toggle
between "P" and "#".
 Pause
Pauses a few seconds when dialing. You can use
multiple pauses. "P" is inserted when entering.
 # (Hash symbol)
When the tone dial is set, "#" sends through a
circuit. When inputting, enter "#".
Enter "Tone" and "*" by pressing <*> on the
ten-key pad. When you press <*>, you toggle
between "T" and "*".
 Tone
Switches to tone dialing if pulse dialing is set. "T"
is inserted when entering.
 * (Asterisk)
When the tone dial is set, "*" sends through a
circuit. When inputting, enter "*".
Reference
 For details on prefix numbers, refer to the User's Manual
Advanced.
Using Speed Dial List and Group List
You can select a destination from numbers
registered in the speed dial list or the group list.
You must register them in advance.
Reference
 For details on how to register numbers to Speed Dial List
and Group List, refer to "Phone Book" P. 93.
1 Press the to select [Speed Dial List]
or [Group List] and then press .
2 Press the to select a destination or
group and then press .
The check box is selected. You can select multiple
entries.
3 When you have selected all the
destinations, press the .
4 Check that [Complete] is selected and
then press .
OK
OK
OK
OK
OK

Oki MB451 Specifications

General

Duplex printing	Yes
Print technology	LED
Time to first page (black, normal)	5 s
Print speed (black, normal quality, A4/US Letter)	29 ppm
Dimensions (WxDxH)	455 x 425 x 427 mm
All-in-one functions	Copy, Fax, Print, Scan
Color all-in-one functions	No
Maximum duty cycle	30000 pages per month
Copier resize	25 - 400 %
Maximum number of copies	99 copies
Time to first copy (black, normal)	11 s
Scan to	CIFS, Fax, FTP, USB
Grayscale levels	7
Scan speed (black)	37.5 ppm
Scan speed (color)	10 ppm
Image formats supported	BMP, GIF, JPG, PCX, PNG, TGA
Faxing	Mono faxing
Fax memory	200 pages
Modem speed	33.6 Kbit/s
Fax transmission speed	2 sec/page
Total input capacity	- sheets
Total output capacity	150 sheets
Maximum input capacity	350 sheets
Total number of input trays	2
Multi-Purpose tray input capacity	100 sheets
Envelopes sizes	9, 10, C5, C6, DL
Maximum print size	210 x 297 mm
Duplex media weight	60 - 112 g/m²
Paper tray media types	Envelopes
Paper tray media weight	60 - 120 g/m²
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 150 g/m²
Display	LCD
Display resolution	320 x 128 pixels
Market positioning	Business
Standard interfaces	Ethernet, USB 2.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Security algorithms	SSL/TLS
Processor frequency	330 MHz
Sound power level (standby)	55 dB
Sound pressure level (quiet mode)	30 dB
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (off)	3 W
Power consumption (PowerSave)	14 W
Power consumption (average operating)	580 W
Mac operating systems supported	Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion
Server operating systems supported	Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64
Windows operating systems supported	Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	20 - 80 %