- 174 -
10. Operating Management/ Specifications
1
Press the (SETTING) button on the operator panel.
2
Press the button to select [Admin Setup] and press the (OK) button.
3
Enter the administrator password.
The factory default administrator name and password are "admin" and "999999" respectively.
4
Select [Enter], and then press the (OK) button.
5
Press or several times and press [Manage Unit].
6
Press [Power Save].
7
Press [Sleep Time].
8
Select transition time.
The machine does not enter Sleep mode in the following cases.
• When an error occurs on the machine
• When a delayed fax transmission is set
• When a fax transmission is waiting for redialing
The machine does not enter Deep Sleep mode in the following cases.
• IPSec is enabled
• A TCP connection is established
Example: A connection is established with Telnet or FTP.
When the transition time to enter Sleep mode or Deep Sleep mode from Power Save
mode elapses and the connection is disconnected, the machine enters Sleep mode.
• E-mail reception is enabled
• Wireless LAN is enabled
• Google Cloud Print is enabled
• LLTD is enabled
• IPv6 Global Address is assigned
In Deep Sleep mode, you cannot use the following protocols to print.
•NBT
In Deep Sleep mode, you cannot search or set by using the following functions and
protocols.
•NBT
In Deep Sleep mode, the following protocols that have the client function do not operate.
• E-mail alert*
2
•SNMP Trap
•WINS*
1
•SNTP*
2
Setting the Length of Idle Time Before Entering Sleep Mode Restrictions in Power Saving Function
*1 The elapse time in Deep Sleep mode is not included in the intervals of WINS update
time.
WINS regular updates are not performed in Deep Sleep mode, possibly resulting in
names that are registered in the WINS server being deleted.
To Next Page
Loading...
Need help?
General
