- 70 -
3. Basic Operations
Loading Paper
This chapter describes various information about paper that can be loaded in a paper tray of
this machine.
To set paper type and weight, press the (SETTING) button on the operator panel >
[Paper Setup] and press the tray you want to use, and then select [Media Type] or [Media
Weight].
• About Paper Types That Can be Loaded
• Loading Paper in Tray 1/2/3
• Loading Paper in the MP Tray
• Paper Storage
• Available paper types
• About Paper Sizes, Weight, and Number of Sheets That Can be Loaded
• Recommended paper
Available paper types
To perform high-quality printing, be sure to use the supported paper types that satisfy
requirements, such as material, weight, or paper surface finishing. Use digital photo print
paper.
If you print on paper that is not recommended by Oki Data, check the print quality and the
movement of the paper thoroughly in advance to ensure that there are no problems.
• Plain paper
About Paper Types That Can be Loaded
Paper type Paper size (mm) (Values in
brackets are inch sizes.)
Paper weight
A4 210 x 297 64 to 220 g/m
2
(17 to 58 lb)
For duplex printing, 64 to 176 g/m
2
(17 to 47 lb)
If you set paper that is 148 mm
(5.8 inches) wide or narrower,
printing becomes slower.
A5 148 x 210
A6 105 x 148
B5 182 x 257
B6 128 x 182
B6 Half 64 x 182
Letter 215.9 x 279.4 (8.5 x 11)
Legal 13 215.9 x 330.2 (8.5 x 13)
Legal 13.5 215.9 x 342.9 (8.5 x 13.5)
Legal 14 215.9 x 355.6 (8.5 x 14)
Executive 184.2 x 266.7 (7.25 x 10.5)
Statement (5.5 x 8.5)
8.5" SQ (8.5 x 8.5)
Folio (210 x 330 mm) 210 x 330
16K (184 x 260 mm) 184 x 260
16K (195 x 270 mm) 195 x 270
16K (197 x 273 mm) 197 x 273
Index Card (3 x 5)
4x6inch (4 x 6)
5x7inch (5 x 7)
To Next Page
Loading...
Need help?
General
