Omni OMNI-624 User Manual

7-1
SECTION 7
Summary of Keypad Functions
•••••••••••••••••••••••••••••••••••••••••••
User Functions
ARMING/DISARMING........................... user code
STAY ARMING...................................... [STAY] + user code
INSTANT ARMING................................ [INSTANT] + user code
STAY/ INSTANT ARMING
.....................
[STAY]
+
[INSTANT] + user code
BYPASS/UNBYPASS ........................... [BYPASS] + user code + zone number or [BYPASS] + zone
number
MULTIPLE BYPASS
.............................
[BYPASS] + user code + zone number + [BYPASS] + zone
number, etc.
QUICK BYPASS.................................... [BYPASS] + zone number
USER CODE PROGRAMMING
.............
[CODE] + master user code + user number + new user code +
auth. Lev.
USER CODE DELETION....................... [CODE] + master user code + user number + [#]
CHANGE PARTITION
........................... [
#] + [0] + user code + [0], [1], [2], or [9]
QUICK ARM .......................................... [#] + [1]
QUICK FORCED ARM .......................... [#] + [2]
SET TIME .............................................. [#] + [3] + user code + Hour + Minute + Day + Year
DISPLAY ZONE DIR.: ........................... [#] + [4] (LCD Keypads only)
DISPLAY/TOGGLE TIME...................... [#] + [6]
USER PART/PAGER ASSIGN.............. [#] + [7] + master code + user number + [1], [2], or [4] (pager)
TOGGLE OPEN/CLOSE REPORTS ..... [#] + [8]
USER ON-LINE DOWNLOAD
...............
[#] + [9]
DISPLAY QUICK COMMANDS............. [#] + [5] + [0] (LCD Keypads only)
DISPLAY TIME...................................... [#] + [5] + [1] (LCD Keypads only)
DISPLAY AUTO-ARM TIME.................. [#] + [5] + [2] (LCD Keypads only)
VIEW EVENT LOG ................................ [#] + [5] + [3] + level 1 or 2 user code (LCD Keypads only)
SET AUTO-ARM TIME
..........................
[#] + [5] + [4] + user code + Hour + Minute
DISPLAY PANEL REVISION ................ [#] + [5] + [5] (LCD Keypads only)
KEYFOB LOW BATTERY TEST........... [#] + [5] + [6] + user code or [#] + [5] + [6] (LCD Keypads only)
DOOR STRIKE ...................................... [#] + [5] + [7], [#] + [5] + [7] + user code, or user codes 20 – 30
CHANGE/VIEW PAGER NUMBER....... [#] + [5] + [8] + pager phone number + [#] or [#] + [5] + [8] + user
code + pager phone number + [#]
PANIC.................................................... [#] and [
✱
] at the same time
FIRE....................................................... [7] and [9] at the same time
AUXILIARY............................................ [1] and [3] at the same time
DURESS (AMBUSH)............................. user code 31 or 32, if programmed
NOTES:
• User codes can be 4 or 6 digits, depending on system programming (Submode 1, Question 12, L3).
• Zone numbers hour/minute, day/year, and trigger numbers require 2-digit entries.

Omni OMNI-624 Specifications

General

Brand	Omni
Model	OMNI-624
Category	Security System
Language	English