Omron CS1W-AD041-V1 User Manual

41
Exchanging Data with the CPU Unit Section 2-5
2-5-3 Special I/O Unit Restart Bits
To restart the Unit operations after changing the contents of the data memory
or correcting an error, turn ON the power to the PLC again or turn the Special
I/O Unit Restart Bit ON and then OFF again.
A single CS1W-AD161 is allocated words for two unit numbers, but uses only
the Special I/O Unit Restart Bit setting corresponding to the unit number that
is set.
Note If the error is not corrected by restarting the Unit or turning the Special I/O
Unit Restart Bit ON and then OFF again, replace the Analog Input Unit.
2-5-4 Fixed Data Allocations
DM Allocation and
Contents
The initial settings of the Analog Input Unit are set according to the data allo-
cated in the Special I/O Unit DM Area. Settings, such as the inputs used and
the analog input signal range must be set in this area.
CS1W-AD041-V1/AD081-V1
Special I/O Unit
Area word
address
Function
A50200 Unit No. 0 Restart Bit Restarts the Unit when turned
ON and then OFF again.
A50201 Unit No. 1 Restart Bit
~~
A50215 Unit No. 15 Restart Bit
A50300 Unit No. 16 Restart Bit
~~
A50715 Unit No. 95 Restart Bit
D(m+1)
D(m)
D20300 to D20399
D20400 to D20499
D20500 to D20599
D20000 to D20099
D20100 to D20199
D20200 to D20299
D20900 to D20999
D20600 to D20699
D20700 to D20799
D20800 to D20899
SYSMAC CS-series CPU Unit CS1W-AD041-V1/081-V1 Analog Input Unit
(Fixed Data Area)
Unit #0
Unit #1
Unit #2
Unit #3
Unit #4
Unit #5
Unit #6
Unit #7
Unit #8
Unit #9
(Special I/O Unit DM Area)
Word
D29500 to D29599
D21000 to D21099
~
Unit #10
~
Unit #n
~
Unit #95
Input signal range
m = 20000 + (unit number x 100)
~
Note Only D(m) to D(m+5) are
supported by the CS1W-AD041-V1.
D20000 + (n x 100) to
D20000 + (n x 100) + 99
Data is automatically
transferred to each unit
number when the power
is turned ON, or when
the Special I/O Unit
Restart Bit is turned ON.
Input conversion
permission loop
mode setting
Sets number of
samplings for mean
value processing
Conversion time/
resolution and
operation mode
D(m+2 to
m+9)
(See note
1.)
D(m+18)
(See note
2.)

Omron CS1W-AD041-V1 Specifications

General

Brand	Omron
Model	CS1W-AD041-V1
Category	I/O Systems
Language	English