Omron E5DC Communications Manual

Revision History
12
E5@C Digital Temperature Controllers Communications Manual (H175)
Revision History
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
Revision code Date Revised content
01 December 2011 Original production
02 January 2012 Page 9: Made correction in Precautions for Safe Use.
03 May 2012 Added the following sections: Section 6 Programless Communications and
Section 7 Component Communications.
Page 10: Added trademark information.
Page 11: Added version information.
Page 13: Added functional upgrade information.
Pages 3-17 to 3-18: CompoWay/F variable area additions.
Corrected mistakes.
04 December 2012 Added Digital Controllers with position-proportional control.
05 March 2013 Page 13: Corrected maximum number of Controllers in four locations and
corrected last line.
Page 6-3: Corrected maximum number of Controllers in two locations and
corrected total number of words in middle of page.
Pages 6-7, 6-13, and 6-14: Corrected maximum number of Controllers in
table.
Page 7-2: Corrected maximum number of Controllers in figure.
06 July 2013 Added E5DC Digital Controllers.
Page 6: Changed notes and changed caution mark.
Pages 7 and 9: Added precautions.
Page 11: Change figures.
Pages 13, 15, 6-1, and 7-1: Removed version indication.
Page 13: Changed sentence at bottom of page.
Page 1-4: Changed model designations and added figure.
Pages 3-15 and 5-8: Added "linear" in two places on each page.
Pages 3-20 and 5-14: Added LCT Cooling Output Minimum ON Time.
Pages 6-1 and 7-1: Added version information.
Page 7-2: Changed model information and figure at bottom of page.
07 December 2013 Added Mitsubishi’s FX Series and Keyence’s KV Series to programless
communications.
Corrected mistakes.
08 April 2014 Made revisions accompanying addition of the E5GC.
Corrected mistakes.
09 July 2014 • Added simple transfer function and status message function to the E5DC
(version 2.2).
• Added seconds as the unit for the soak time (version 2.2).
• Added Lloyd’s standards for the E5DC.
• Corrected mistakes.
10 August 2014 • Added the Valve Opening Monitor Selection and FB Moving Average
Count parameters for E5EC/E5AC-PR@-8@@ (version 2.2).
11 June 2015 Page 3-11: Added note *4 and references to it in table.
Page 6-5: Added note *2 and changed references to notes in table. Added
'RS-485' for port 2 of CP-series CPU Units.
H175-E1-14
Revision code
Cat. No.

Omron E5DC Specifications

General

Brand	Omron
Model	E5DC
Category	Temperature Controller
Language	English