Omron NJ501-1400 User Manual

37
Related Manuals
NJ-series CPU Unit Hardware User’s Manual (W500)
NX-series EtherCAT®
Coupler Unit User’s Man-
ual
W519 NX-ECC Learning how to use an NX-
series EtherCAT Coupler
Unit and EtherCAT Slave
Terminals.
The following items are described: the overall sys-
tem and configuration methods of an EtherCAT
Slave Terminal (which consists of an NX-series
EtherCAT Coupler Unit and NX Units), and infor-
mation on hardware, setup, and functions to set
up, control, and monitor NX Units through Ether-
CAT.
NA-series Programmable
Terminal Software User’s
Manual
V118 NA5-
W
Learning about NA-series
PT pages and object func-
tions.
Describes the pages and object functions of the
NA-series Programmable Terminals.
NS-series Programma-
ble Terminals Program-
ming Manual
V073 NS15- 
NS12- 
NS10- 
NS8- 
NS5- 
Learning how to use the
NS-series Programmable
Terminals.
Describes the setup methods, functions, etc. of the
NS-series Programmable Terminals.
Manual name Cat. No. Model numbers Application Description

Omron NJ501-1400 Specifications

General

Brand	Omron
Model	NJ501-1400
Category	Control Unit
Language	English