Omron R88M-W User Manual

2-178
H Performance Specifications
Model Standards
Type Hand-held
Accessory cable 1 m
Connectors 7910-7500SC (10 pins)
Display 7-segment LED
External dimensions 63 × 135 × 18.5 mm (W × H × D)
Weight Approx. 0.2 kg (including 1-m cable that is provided)
Communications
ifi i
Standard RS-232C
specifications
Communica-
tions method
Asynchronous (ASYNC)
Baud rate 2,400 bps
Start bits 1 bit
Data 8 bits
Parity None
Stop bits 1 bit
Errors detected by Parameter
Unit
Display
CPF00 Cannot transmit even after 5 seconds have
elapses since power supply was turned on.
U
CPF01 A BCC error or faulty reception data has oc-
curred for five consecutive times, or a time
overrun (1 s) has occurred for three consecu-
tive times.
2-8-2 Parameter Unit Cable (R88A-CCW002C)
If the 1-meter cable provided with the Parameter Unit is not long enough, then replace it with R88A-
CCW002C Parameter Unit Cable (2 meters).
Note If this cable is connected to an OMNUC U-series Hand-held Parameter Unit (R88A-PR02U), the
Parameter Unit can be used as an OMNUC W-series Parameter Unit. (Operation is the same as
for the R88A-PR02W.)
D Cable Models
Model Length (L) Outer diameter of sheath Weight
R88A-CCW002C 2 m 6 dia. Approx. 0.2 kg
D Connection Configuration and External Dimensions
Parameter Unit
R88A-PR02W
R88A-PR02U
R88D-WTj
Servo Driver
Standard Models and Specifications Chapter 2

Omron R88M-W Specifications

General

Brand	Omron
Model	R88M-W
Category	Servo Drives
Language	English