Omron SYSMAC C200H-NC112 User Manual

73
n
02
(n = 100 + 10 x unit number)
ORIGIN SEARCH command bit
(ORIGIN SEARCH is started when this bit is turned on)
4–3–3 Execution Examples
The following examples show the relationships among the mode number,
DIP switch pin no. 3 (origin proximity present/absent), DIP switch pin no. 8
(origin proximity reverse present/absent) and operation. In the examples, the
origin and origin proximity signals both use NC inputs (i.e., DIP switches 4
and 5 are ON).
Mode 0
Connect the open collector signals of the sensor, etc., to the origin line driver
input (A11, B11) of the Position Control Unit. Origin response time is 1.0 ms.
For wiring diagrams in each mode, refer to
Section 2–2 .
ORIGIN SEARCH Section 4–3

Omron SYSMAC C200H-NC112 Specifications

General

Brand	Omron
Model	SYSMAC C200H-NC112
Category	Control Unit
Language	English