325
Trial Operation and Debugging Section 7-2
Trace Trigger Monitor
Flag
A50811 This flag turns ON when the trace trigger condition has been met after
the Trace Start Bit has turned ON. This flag will turn OFF when the
sampling is started again by turning ON the Sampling Start Bit.
Trace Busy Flag A50813 This flag turns ON when sampling is started by a Sampling Start Bit
and turns OFF when the trace has been completed.
Trace Completed Flag A50812 This flag turns ON if Trace Memory becomes full after the trace trigger
condition has been met during a trace operation and turns OFF when
the next sampling operation is started.
Name Address Description
To Next Page
Loading...
Need help?
General
